previous contents
Previous: The Mask Fabrication Process

5 A Sample Run - MSLIT

The following is a sample run on BigX using the data in file "test.dat" listed in the section 2.2.3. One other auxiliary file 'specs12.dat' is also needed in your directory. Typing "t" should start the trial program, assuming /usr/local/bin/ is in our path.

       ------------------------------------------------------
       WELCOME TO THE PROCEDURE FOR DESIGNING MULTISLIT MASKS
            *** Kitt Peak National Observatory ***
       ------------------------------------------------------

   * THESE MASKS WILL BE DESIGNED FOR USE AT KPNO 4-M TELESCOPE *

   * ASSIGN SPECIFICATION FILE FOR KPNO CRYOCAM/RCSP FILM MASKS *
       Fortran LUN 1 is: ./specs12.dat

    ENTER THE INPUT DATA FILENAME FOR PROCESSING (file.typ): test.dat
    Fortran LUN 2 is ./test.dat; OK? [Y] y

     THE SOLUTION CAN APPEAR ON YOUR TERMINAL OR BE WRITTEN TO A FILE.
     DO YOU WISH THE SOLUTION TO APPEAR ON YOUR TERMINAL? (Y/N): y

    DO YOU WANT ANY PLOTS: (Y/N)? y
    ENTER THE NUMBER OF PLOTS TO BE GENERATED [1]: 1

    YOU MAY APPEND TO OR DELETE THE EXISTING PLOT FILE.
    CHOOSE APPEND OR DELETE [DELETE]:

 PROGRAM SLITS, VERSION 28MAR85 , BY DON WELLS.
 MULTI-SLIT MODIFICATIONS BY JIM DE VENY.
 Converted for Unix, 26Oct94, jan@noao.edu.

 SYSTEM SPECS NAME=CRYO-FILM1   (SPECS COMPUTED: 10/29/84  14.43.00.)
   FL=  31136.66, PSCALE=   6.624, RMAX=   23.60
   XA-YA=   26.19   25.76, XL-XH= -100.00  100.00, YL-YH= -100.00  100.00

 DATA DECK.
 MULTI-SLIT APERTURE PLATE NAME=test.dat
 DX=    0.40, SKYRAD=    6.00, NPLATE= 1
 PA1=   80.00, PA2=  100.00, DPA=    0.05 EXTEND =  T, DEXT = 0.50, NEXT =  7
 YEAR= 1995.25  EPOCHIN=1950.0  PLOT= T
          setup a                  02 19 23.31  +42 47 25.0
          setup b                  02 19 30.95  +42 47 57.9
     1    QSO  abc                 02 19 29.99  +42 48 30.2 5000.
   101                             02 19 30.55  +42 48 43.0 2000.
   102                             02 19 31.22  +42 49 55.8 200.
   103    gal q                    02 19 31.42  +42 49 14.6 200.
   104                             02 19 33.99  +42 49 45.5 500.
   105                             02 19 31.69  +42 48 42.5 1500.
   106    blk hole                 02 19 34.57  +42 49 05.4 1000.
   107                             02 19 32.61  +42 48 40.2 2500.
   108                             02 19 22.09  +42 49 55.7
   109    CHECK STAR               02 19 30.97  +42 48 29.0 2000.
   110                             02 19 32.05  +42 48 24.1 700.

 NS= 15  [NSMAX=200]
 THE DATA ARRAYS:    ( EPOCH = 2000.0 )
    0 SETUP      02:22:32.82 +43:01:03.4    6.364  -2.433    0.0    1.2 0
    0 SETUP      02:22:40.50 +43:01:36.0   -6.365   2.436    0.0    1.2 0
  109 CHECK STAR 02:22:40.53 +43:02:07.0   -1.628  -0.192 9999.0    1.5 1
    1 QSO  abc   02:22:39.55 +43:02:08.3    0.000   0.000 5000.0    6.0 0
  107            02:22:42.18 +43:02:18.2   -4.363   1.475 2500.0    6.0 0
  101            02:22:40.12 +43:02:21.1   -0.945   1.925 2000.0    6.0 0
  105            02:22:41.26 +43:02:20.5   -2.838   1.835 1500.0    6.0 0
  106 blk hole   02:22:44.16 +43:02:43.3   -7.643   5.257 1000.0    6.0 0
  110            02:22:41.61 +43:02:02.1   -3.415  -0.946  700.0    6.0 0
  104            02:22:43.59 +43:03:23.4   -6.727  11.317  500.0    6.0 0
  102            02:22:40.81 +43:03:33.9   -2.138  12.909  200.0    6.0 0
  103 gal q      02:22:41.00 +43:02:52.6   -2.423   6.686  200.0    6.0 0
  108            02:22:31.65 +43:03:34.1   13.023  13.004    0.0    6.0 0
    0 setup a    02:22:32.82 +43:01:03.4   11.171  -9.755    0.0    6.0 0
    0 setup b    02:22:40.50 +43:01:36.0   -1.559  -4.888    0.0    6.0 0
      **** PROGRAM RUNNING ****

MULTI-SLIT APERTURE PLATE NO.   0000    [test.dat  ]

  POSITION ANGLE= 80.00 DEGREES.  [FOR 1995.25]
  SUM OF WEIGHTS FOR THIS PLATE=   0.1850E+05
  NUMBER OF APERTURES=  6    [NSKY= 0,NOBJ= 4]     EXTEND SLITS =  T

  SETUP POSITION= 02:22:36.66 +43:01:19.7   (2000)

 CENTER POSITION= 02:22:39.55 +43:02:08.3   (2000)

  DELTA POSITION=        2.89        48.6


 OBJ  NAME          RA  (2000)  DEC         XLO     XHI (MM) Y      WT   RADIUS

 106 blk hole   02:22:44.16 +43:02:43.3   -9.874  -7.308   3.850 1000.00  6.00
   0 SETUP      02:22:40.50 +43:01:36.0   -6.880  -6.503   1.294    0.00  1.25
 107            02:22:42.18 +43:02:18.2   -5.987  -3.119   0.695 2500.00  6.00
 109 CHECK STAR 02:22:40.53 +43:02:07.0   -1.796  -1.343  -0.472 9999.00  1.50
   1 QSO  abc   02:22:39.55 +43:02:08.3   -0.906   1.434   0.000 5000.00  6.00
   0 SETUP      02:22:32.82 +43:01:03.4    6.502   6.879  -1.291    0.00  1.25

 *****   PLOT  FINISHED   *****
 A LIST OF THE REMAINING UNDRILLED OBJECTS:

  NUM   NAME                        RA       DEC        WT       RAD

  101.                           35.67     43.04   2000.00      6.00
  105.                           35.67     43.04   1500.00      6.00
  110.                           35.67     43.03    700.00      6.00
  104.                           35.68     43.06    500.00      6.00
  102.                           35.67     43.06    200.00      6.00
  103.  gal q                    35.67     43.05    200.00      6.00
 *** PROGRAM EXIT - NORMAL ***
 == PAUSE == >> SWITCH TO TEK MODE (control-middle button) ON X-TERMINALS
 == PAUSE == >>   HIT <CR> FOR PLOTS
After viewing the plot to return to the normal xterm window, hit any letter key when the cursor is in the TEK window, then the hit control-middle mouse button and select "Hide TEK Window".

  
Figure 4: Plot Generated by Program MSLIT


previous contents
Previous: The Mask Fabrication Process

kessel@noao.edu
Updated 16Feb1996