Figure 3: The parameter files for detpars.

cl> lpar detpars
        (gain = 1)              Gain setting
    (preflash = 0.)             Preflash time (seconds)
        (xsum = 1)              pixels summed in X direction
        (ysum = 1)              pixels summed in Y direction
      (xstart = 1)              Start of ROI in X
      (ystart = 1)              Start of ROI in Y
       (xsize = 4096)           Size  of ROI in X
       (ysize = 4096)           Size  of ROI in Y
      (extend = "separate")     Method of extending ROI to include overscan
      (xskip1 = 0)              X pixels to skip at start of overscan
      (xskip2 = 0)              X pixels to skip at end   of overscan
      (xtrim1 = 0)              X pixels to trim at start of data
      (xtrim2 = 0)              X pixels to trim at end   of data
      (ytrim1 = 0)              Y pixels to trim at start of data
      (ytrim2 = 0)              Y pixels to trim at end   of data
  (amplifiers = "lowerfour")    Readout amplifiers to be used
     (pixsize = 15.)            Pixel size in microns
    (nxpixels = 4096)           Detector size in X
    (nypixels = 4096)           Detector size in Y
   (noverscan = 64)             Number of overscan pixels
     (detname = "MM2")
        (mode = "ql")