Next: obspars
Previous: detpars
This parameter file currently has two uses: (a) to allow the observer
to easily enter some items automatically into the header, and (b) to
enable the "scanning" with the PFCCD scan-table at the 4-m. If you
are using the scan table the parameter instrname should be set
to ``pfccd"; otherwise, it should be set to ``test"
(Figure 4).
You may enter whatever you wish into the other parameters; these
will make their way into your headers. Spectroscopists might find it
particularly useful to specify if the dispersion axis is along rows
(dispaxis=1) or along columns (dispaxis=2) to ease the reduction process.
jbarnes@noao.edu
Tue Feb 14 07:48:00 MST 1995