contents
Next: WAVELENGTH CALIBRATIONS
Previous: The Setup Observe Command
Up: CONFIGURING FIELDS


Sample of Setup Observe Command

Fiborg 4.0.0 >setup observe
Making sure the focal plane plate is warped.
--please wait...
Do you wish to move the rotator into position [ Yes or No ]? 
(Yes)> no
Making sure comparison sources are off.
CU lamp set is OFF
Moving to field center.
Insuring LEDs are off.
Making sure screen is out of the way.
Do you wish to view any fibers [ Yes or No ]? 
(No)> y

To view buttons or objects, enter:

	'o id# <return>' for an object
	'f id# <return>' for a  fiber
	's id# <return>' for a  slit position
	'  c   <return>' for the field center
	'  b   <return>' for a benign gripper position
	'  ?   <return>' for this menu

Hitting <return> on an empty line will exit the loop

view> f 192
viewing button #192
This fiber, #192, is Extended 
Viewing obj. #2 "10.42 0.041         "  fiber: 192 Probe I 
view> 
Making sure Gripper is out of the way.
WARNING:  X,Y motion is now *disabled*!
Use "gripin" to re-enable.


YOU ARE NOW READY TO BEGIN OBSERVATIONS!

Fiborg 4.0.0 >



Sam Barden
Tue Aug 29 16:45:05 MST 1995