Next: The Setup Observe Command
Previous: The Setup Field Command
Up: CONFIGURING FIELDS

Sample of Setup Field Command

Fiborg 4.0.0 >setup field
Enter name of  hydra file.
> 
f2125red.hydra
#0000000011111111112222222222333333333344444444445555                           
#2345678901234567890123456789012345678901234567890123                           
Current file name : f2125red.hydra
Field name        : F2125
Equinox(IN)       :    1950.00
Current epoch     :    1995.60
Mid-exposure ST   :      21.00
Exp. Time (hr)    :       0.50
Spectrograph wavelength :    8000.00

WARNING:  File is not intended for the current fiber cable!
Would you like to switch the current cable to match [ Yes or No ]? 
(Yes)> yes

How long do you plan to observe with this configuration? [hours]
(0.50)> 3

Enter the anticipated sidereal time at midpoint.
( 21:00:00.0)> 19.5

Park unused fibers [ Yes or No ]? 
(Yes)> 
Making sure comparison sources are off.
CU lamp set is OFF
Turning on gripper. LEDs
Flatting plate.
WAITING: --for rotator to go to zero.
Rotator is in Position.
generating interaction table.
Parking fiber 2, which means:  moving button   2 to  86217,   3765
Parking fiber 5, which means:  moving button   5 to  85786,   9396
moving button   0 to     21,    -15
moving button   1 to  56678,   2134
moving button   4 to  62543,   8663
Parking fiber 8, which means:  moving button   8 to  84988,  14987
moving button   7 to  57547,  10568
moving button  10 to   8530,   1906
moving button  13 to  65007,  21824
moving button  16 to  68778,  27071
.
.
.
moving button 262 to  57564, -42117
moving button 264 to  25712,  -6516
moving button 274 to  53972, -20405
moving button 277 to  35582,  -6634
moving button 283 to  48806,  -7698
moving button 286 to  69383,  -5806
Writing Aperture Identification file into: /home/fibdev/fields/f2125red.hydra.iraf.5
Compressing and purging archive CurrentLocations file. Please wait.
Warping the focal plane plate.
--please wait...
Fiborg 4.0.0 >